in

How To Clean A Dyson Vacuum

This Post may contain Affiliate Links. Please read our Disclosure for legal jargon.

We often take things that keep our households clean for granted, like the Dyson vacuum, which may not have seen the face of a clean rag in a long time. If you’re wondering why you need to clean your Dyson vacuum in the first place, then let us help you out.

Cleaning your Dyson vacuum is just as important, if not more important, than maintaining your car. The grease and dirt that come out of your vacuum are probably what you have been breathing in every day at home, especially if you have pets or kids running around all the time. A dirty Dyson vacuum collects pet hair, dust, pollen grains, and all kinds of other allergens, and let’s not forget the smell!

This is essentially why we have put together this step-by-step guide on how to clean a Dyson vacuum. All you have to do is get ready, go through these steps, and give your vacuum the cleaning it needs.

Steps To Clean A Dyson Vacuum

Cleaning your Dyson vacuum is a simple process when you know what you’re doing. Every one or two months, use our step-by-step approach. You can do it more frequently if you vacuum or deep clean regularly.

Step 1: Unplug The Vacuum

First things first, always unplug your vacuum before attempting to clean it. The last thing you want is for your beloved Dyson vacuum cleaner to get damaged or for you to get an electric shock, so do yourself a favor and turn the power off.

Step 2: Clean The Dust Canister

Now that the vacuum is unplugged, you must be wondering where to start. The dust canister is an excellent starting place since all Dyson vacuums are bagless. It’ll be at least half full after you’ve cleaned everything. So begin by emptying the dust and dirt out of it.

You will be able to find the canister underneath the cyclones, but if it isn’t there, you can check your manual to know for sure where the canister is! Most of the models also come with a button that will release the bottom of the canister. If your Dyson doesn’t have this button, use a flathead or a screwdriver to pry open the canister and dump the contents into a trash bag.

RELATED:  How To Remove Scuff Marks From Walls

Now that you’ve completely thrown out whatever dirt was within it use a damp microfiber cloth to clean the inside of the canister. Ensure that you’re not leaving behind any kind of dampness inside, as moisture can quickly lead to mold. Use a compressed air device to wipe out the excess dirt instead of any harmful liquids if need be.

Step 3: Clean And Wash The Filters

As with any other wind-operated machine, the filters play a critical role in ensuring the functionality of the Dyson vacuum. These filters are responsible for the high suction level and trapping dirt, bacteria, and pollen. Most models of Dyson have filters placed near the dust canister, but there are some with filters placed in the head.

You must get rid of the dust and dirt on it by tapping gently or cleaning with a brush. Then you can take the filter and place it under a running faucet. It is, however, advised not to use any detergent or chemicals for this purpose. You may gently squeeze the water out and repeat this procedure until the water is clear. You’ll know it’s clean just by looking at it.

Now it’s time to let it dry thoroughly in a warm natural setting before you can place it back. This may take up some time as it is not advised to use a dryer.

RELATED:  How to Clean Cast Iron Grill Grates

Step 4: Untangle The Brush Bar

If you have pets at home, the chances are that the brush bar of your Dyson has gotten tangled with pet hairs. Even if you don’t, the brush is the one that collects all the hair and dirt from your floors- which is why it is vital to get it cleaned.

You will have to detach the entire head from the vacuum to do that. The soleplate must be removed on some Dyson models to clean the brush bar. You may need a flat head screwdriver to remove the screws on various models. Once it opens, you can easily pull out the brush and start removing debris from it. This can be done either manually or by using a pair of scissors to cut the entwined dirt and hair.

Use a damp microfiber cloth to wipe out any remaining dirt and let it dry completely before placing it in and fixing the soleplate.

Step 5: Unclog The Hose

The second last step is to clean the hose of your Dyson vacuum. You will have to release the hose from its connecter to start this. After that, detach the wand and tube where all the dirt is collected. It’s in this section where most of the hair can be found.

RELATED:  How To Clean Burnt Pans

Fill your kitchen sink with warm water and one cup of vinegar. Submerge the hose in the solution using your hose. You may then use the faucet to flush it out. This is easier to do if you hold your hose in a U formation. Let the hose dry for around 24 hours in a natural setting before assembling it back.

Step 6: Wipe Everything Down

Once you’ve cleaned all the components, you can now fix them back together and place your Dyson vacuum cleaner’s head back on its body. It is time to wipe the outside with a clean and slightly damp microfiber cloth to ensure that the outside is as clean as the inside. You should consider cleaning the vacuum’s soleplate and wheels as a preventative step. Trailing across unclean surfaces and carpets may also collect dust.

Conclusion

All you need is a clean cloth, a screwdriver, some patience, and all you have to do is follow these easy steps alongside to transform your dirty Dyson vacuum into as reasonable as new! This will make your cleaning easier and ensure that your house is completely dirt-free.

Next post